Lonsdor K518ISE User guide for bigainner

Before using Lonsdor K518ise key programmer, you need first of all to set WIFI when you turn on the device, then
go through the registration&activation process, make sure well connection between the device, OBD cable and the vehicle under proper circumstance.

Lonsdor K518ise Operation detail steps:

First time to start Lonsdor K518ise, please set the network (connect available WIFI).

After networking, the system will automatically updated to the latest version. There are 3
ways of system update:

1.One key update: quickly update the new added or modified functions.
2.APK update: this is used when the APK is updated.
3.Registration & activation

After Lonsdor K518ise system updating, you need go to registration&activation. For new user, click
Registration, input user name(email), name(min 2 char), password(min 6 char), email
verification code and click YES to complete registration(if interrupted after registration is
done, you will go to the System update–Registered user to proceed). Then go to
Activation confirmation to continue.

After confirming activation, it will enter into Setup password interface, please set 6-digit
numbers as your startup password. Then after information verification by Lonsdor (5-30
minutes, you can check the progress by clicking “Refresh” ), you will required to re-enter the
password to verify, when you get the notification that verification successful, the whole
process before using the device is complete.

Learn More About Lonsdor K518ise key programmer please check the K518ise user manual

www.keyprom8.com

How to Program Key for Ferrari F12 by Lonsdor K518SE

This article show the guide on how to use Lonsdor K518 program key for Ferrari F12.And at the begin of the article you will get the Ferrari F12 function overview.
15

14

Ferrari Key Programming function operation procedures:

Immobilizer data backup which is prepare for generating dealer keys.

Programming keys

Programming remote keys function

Write the immo data into the new key.

 

Procedures of programming key for Ferrari F15 Key:

Step 1:Immobilizer data backup

Connect the Lonsdor K518 to vehicle by OBD port,then turn the ignition to “ON” position

Operate the K518 to read the vehicle BCM info.

Turn off ignition,wait for data reading,it will take about 6 minutes.

Rename the immobilizer data and save it on you computer.

Note:If the immo data reading unsuccessful,it caused by different chip model.You need to remove the chip,and use the programmer to read out the EEPROM data(.bin file).Then sent the .bin file to lonsdor engineer,them will switch the .bin file into special file.After you getting the special file,connect the lonsdor k518 to computer,copy the special file on the feature_9 folder.

Step 2: Generate Dealer Keys

Enter the lonsdor K518 system,select the immobilizer data(special file)

Put the key into the Key frequency & chip recognition coil

It will recognition the key ID,system programming and generate dealer keys.

Step3:Key Programming

The original key also need to be programmed,the new keys programmed is customized.

Turn on the ignition,system will read out the BCM info.

Enter the authorization code.

After first key programming,put the second key to program.Turn the ignition to “ON” position and follow the prompt to finish the programming.

1 2 3 4 5 10 9 8 7 6 12 11

Step 4:Remote programming:

Turn on the ignition,system read out the BCM info.

Enter the authorization code.

Holding any key on the remote about 3 seconds after select the “Confirm” on lonsdor k518.

Follow the guide on the software to complete next key program.

Below picture show the location of Ferrari F12:

www.keyprom8.com

Is it possible to Program VW Polo 2009 4th IMMO NEC+24C32 Remote Key by Lonsdor K518?

Here’s the demo guide on programming VW Polo year 2009 4th IMMO NEC+24C32 smart remote key with Lonsdor K518 key programmer by OBD.

Key information:

Original key: 3-button folding remote key

Frequency: 433MHz

Chip type: Special ID48 chip (TP23)

Device to program: Lonsdor K518ISE key programmer

4-11
Procedure:

Connect K518 host with vehicle via OBD diagnostic socket

Select Immobilizer->VAG->4th Immobilizer->Identify Immo type

4-21

4-31

4-4

Lonsdor K518 identified immo type: 4th IMMO

4-5
K518 from www.keyprom8.com detect vehicle part number and immo type

4-6

Select NEC 24C32

4-7

Then Backup EEPROM and save data

4-8

4-9

Select Read Immobilizer data

4-10

Lonsdor K518ISE at OBD2 key programmer read vehicle information: VIN, CS, PIN, key number and key ID

4-111

Select Make Dealer Key

4-12

Push card slot on K518 main unit from right direction

Insert new key to be programmed into card slot

4-13

4-14

 

Select Key Learn

4-15

Enter key number to be programmed (keys that will start vehicle )

4-16

Insert key and turn ignition on one by one

I.E, Dashboard shows 1-2 means 1 key has been learnt, 2-2 means 2 keys have done

4-17

Program success.

4-18

Test remote and star car.

http://www.keyprom8.com/wholesale/auto-car-key-programmer/

Locksmith show u how Lonsdor K518 Program Key for Audi Q3 2013

This article share the guide on how to use Lonsdor K518 Key programmr to program key for Audi Q3 2013.And the article includes in 4 parts:
Function, Operation, Attention, and  Reference.
Function
1. Backup EPROM: backup car EPROM data;
2. Restore EPROM: copy the backed up EPROM data onto the car computer, to restore it to the original state;
3. Make dealer key: use the backed up EPROM data to write a blank new key to be a dealer key that can be programmed directly;
4. Add key (OBD): use the customized or generated dealer key to directly program key, applicable for the smart card;
5. Directly add key: use the customized or generated dealer key to directly program key, applicable for the folding key;
6. Delete key: delete the programmed key;
7. Reset dashboard
8. Odometer adjustment: to correct mileage;

Attention
1. During all the system operation, the dashboard will be in the extinguished state, that is normal;
2. Delete key process:
Step 1. Read immodata; Step 2. Select an existing key; Step 3. Write back immodata.

Reference
Chip model: Dedicated 48 chip
Remote type: 220G 315 frequency
Key embryo no.: No.31
PIN code requirement: Backup EPROM data
Remote generation: Program smart key complete, remote will automatically generated
OBD position: Under the steering wheel:

Under-the-steering-wheel

The car model

car-model
The key
key
Operation
Backup EPROM
1. This function can read the device EPROM data and save in K518ISE;
2. For smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Getting system data, it takes about 2 min, please be patient;
5. Read the vehicle PIN code and other info;
6. Please enter the file name to be saved;
7. EPROM data is saved.

Restore EPROM
1. Note: Write the wrong EPROM data may lead to the car can not start, please confirm that the data to be written is the car EPROM data backed up via K518ISE;
2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Please confirm the current data is the car EPROM data;
5. Writing EPROM data, about 2 minutes, please be patient;
6. Resetting the dashboard, EPROM data is restored.

Make dealer key
1. This function can generate a dealer key to be programmed, then use this key to perform “Add key” operation;
2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Getting system data, it takes about 2 min, please be patient;
5. Please choose to vehicle brand;
6. Please insert the blank key to be programmed into the K518ISE card slot;
7. Make dealer key success.

Add key (OBD)
1. This system is suitable for directly programming smart card dealer key.

Directly add key(suitable for folding dealer key directly programming)
1. This function can directly add a dealer key to the immobilizer system, please put the new key into the coil, and connect the host to the car OBD port;
2. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;
3. The system read out the part number, now is going through security certification, and loading external code;
4. Getting system data, it takes about 2 min, please be patient;
5. Writing immodata, about 2 minutes, please be patient;
6. Add key complete.
Delete key
1. This function can delete an existing key;
2.The process of this function:
Step 1. Read anti-theft data Step 2. Select an existed key Step 3. Write back immodata;
3. For a smart key, please turn off and on the ignition, and then click OK; otherwise click OK directly;
4. The system read out the part number, now is going through security certification, and loading external code;
5. Getting system data, it takes about 2 min, please be patient;
6. Please select the key to be deleted;
7. System communicating, delete complete.
Reset dashboard
1. Establishing communication, the system is resetting the dashboard;
2. Reset complete.
Odometer adjustment
1. This process can read and calibrate the odometer mileage;
2. if the car is a smart key, please turn off the ignition and then turn on the ignition, and then click OK, otherwise click OK;
3. Read the current mileage;
4. Going through security certification and loading external code, getting data, it takes about 2 minutes;
5. Please enter the new mileage needed to be calibrated ;
6. During writing… write complete.
Lonsdor K518 

www.keyprom8.com

Test result of Lonsdor K518ISE on VAG 2010- all keys lost

Does Lonsdor K518ISE support VAG all key lost?

Answer: Only support a part. Support 4th Immo system 202AD key. In another word, as long as the 4th IMMO can be read out data successfully by 202AD.

Actually, it’s hard to express in words especially if the users are not skilled. Besides it requires Lonsdor engineer qualified tech support.

Anyone who has interest VAG 2010- all keys lost with Lonsdor K518ISE, email at Sales@Keyprom8.com for tech support.

http://www.keyprom8.com/wholesale/lonsdor-k518ise-key-programmer-with-odometer-correction-function.html

 

Castomer review for CGDI Prog MB key progrmmer

Hi,

Will Buy this tool

http://www.keyprom8.com/wholesale/cgdi-prog-benz-key-programmer.html

Have anyone read any experience with this tool?

Looks good to program new Keys :-)

RE: 2017 CGDI Prog MB Benz Key Programmer

1.Supports fastest add Benz Car keys: collection time 1’50s, password calculation time 40s, 99% get password for one time calculator, it is the fastest key programming tool to calculate the password at present.

2.Supports MB all key lost, including 211,209,204,207,212,166,246,197,172,164 +, 216 etc.

3.CGDI Prog MB can calculate the password twice free each day.

Wow 2 pass free each day.

Somebody use it ?

RE: 2017 CGDI Prog MB Benz Key Programmer

2 keys i one day is ok for me

But work this tool realy so good?

Will not spend 500€ for crap

I am also curious about this tool.

But price tag

And one new tool is coming from Belorussia its called Mercedes keymaster.

Preorder price tag was 50000rb

RE: 2017 CGDI Prog MB Benz Key Programmer

i think it is good for me if all what you said is true

RE: 2017 CGDI Prog MB Benz Key Programmer

i have one 3 weeks ago and it has already paid for itself already, 1 all keys done and 2 spares done . am awaiting updates and all will be profits.It works 10000%

RE: 2017 CGDI Prog MB Benz Key Programmer

Nice!

Will order this tool :-)

RE: 2017 CGDI Prog MB Benz Key Programmer

I buy this tool.

When i received this tool upload photos and do videos.

Will test read EZS and calculate Keys to test server

Mercedes W220 2003 Facelift

Mercedes W212 2009

CGDI Prog MB tests good

CGDI Prog Test:

program new keys to W221 W166 W211 A166

works good

www.keyprom8.com

Lonsdor k518ISE VS OBDSTAR X300 DP

Lonsdor k518ISE differs from obdstar X300 DP (key master DP) in vehicle coverage and price.

  1. vehicle coverage

obdstar X300 DP (key master DP) feedback: I have the Key Master and its Ok works 50% of the time and the rest it fails to communicate.

Lonsdor K518ISE Key programmer vehicle coverage has no feedback yet, this one looks interesting but only time will tell. From what you’ve read, you will find this Lonsdor k518ISE is a little better than AVDI for a lot less the money. It is also twice the money of OBDStar X300 DP and Xtool tablets.

It claims to work on Volvo, LR, BMW FEM and CAS4, VAG IMMO5, etc…
There are some videos on the most used European cars from Ford, PSA, Fiat, Opel, VAG, Renault…as well as American cars, Asian cars etc, judging from CI600 reputation K518ISE should work.rice

obdstar X300 DP (key master DP) price: more than $800 and less than $900 (google search you will find)
Lonsdor K518ISE Key programmer price: 1199 USD free shipping
obdstar-x300dp-vs-lonsdor-k518ise
Conclusion:
So if you want to cover more cars you should choose between k518ise.
OBDStar doesn’t seem to offer an adequate alternative for the Android tablet products.

www.keyprom8.com

 

Copy Protected by Chetan's WP-Copyprotect.